- Posts: 541
- Thank you received: 27
Zonte Video - February 19, 2024
Zonte Aug. 10, 2023 Video
Login Form
Performance 2009 to 2023 (compound annual)
New subscribers, setup your Login ( Menu-Login)
zonte metals
- lynnsa10
-
- Offline
- Platinum Member
-
Less
More
5 years 3 months ago #122045
by lynnsa10
lynnsa10 replied the topic: zonte metals
DJ, agree, I just posted a must see video on the gold thread. The Fed reverses course and the world is losing confidence in England holding their gold, if there is any left
www.playstocks.net/index.php/forum/gold-...ment-shifting#122044
www.playstocks.net/index.php/forum/gold-...ment-shifting#122044
Please Log in or Create an account to join the conversation.
- DearJohn
-
- Offline
- Platinum Member
-
Less
More
- Posts: 346
- Thank you received: 6
5 years 3 months ago #122043
by DearJohn
DearJohn replied the topic: zonte metals
Gold up as Fed pukes today and changes course.
We are going to have a lot fun this year with the miners and our turn is long over due
www.playstocks.net/index.php/forum/gold-...ment-shifting#122042
We are going to have a lot fun this year with the miners and our turn is long over due
www.playstocks.net/index.php/forum/gold-...ment-shifting#122042
Please Log in or Create an account to join the conversation.
- GoldnBoy
-
- Offline
- Platinum Member
-
Less
More
- Posts: 1179
- Karma: 1
- Thank you received: 26
5 years 3 months ago #122036
by GoldnBoy
I would be surprised if it is more than 300 meters on first pass, you can go deeper later once drilling starts proving the dimensions, but depending on angle of drill hole, it could go 400 meters but only down 200 in depth.
GoldnBoy replied the topic: zonte metals
ron wrote: How deep will they go,anxious to see that.
I would be surprised if it is more than 300 meters on first pass, you can go deeper later once drilling starts proving the dimensions, but depending on angle of drill hole, it could go 400 meters but only down 200 in depth.
Please Log in or Create an account to join the conversation.
- alexgreat
-
- Offline
- Platinum Member
-
Less
More
- Posts: 641
- Thank you received: 18
5 years 3 months ago #122035
by alexgreat
alexgreat replied the topic: zonte metals
I would bet Terry is back at PDAC this year and with drill results. Might have to expedite the first hole. Would be awesome if it turns out to be the buzz at PDAC.
Well I can at least have wishful thinking
Well I can at least have wishful thinking
Please Log in or Create an account to join the conversation.
- ron
-
- Offline
- Platinum Member
-
Less
More
- Posts: 2173
- Thank you received: 26
5 years 3 months ago #122031
by ron
ron replied the topic: zonte metals
How deep will they go,anxious to see that.
Please Log in or Create an account to join the conversation.
- flynn
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 975
- Thank you received: 9
5 years 3 months ago #122030
by flynn
flynn replied the topic: zonte metals
I know what you mean, I wish I was the guy who sold in the $.040's 2 years ago with the Yukon run up.
I would of bought back in the low teens, after the drill results.
This time 2 years ago remember the excitement on Yukon. Stock jump from 7 cents to 40 cents. And a room was rented at the Royal York during PDAC
No buzz this time around, and we a months away from a drill results and PDAC
I would of bought back in the low teens, after the drill results.
This time 2 years ago remember the excitement on Yukon. Stock jump from 7 cents to 40 cents. And a room was rented at the Royal York during PDAC
No buzz this time around, and we a months away from a drill results and PDAC
Please Log in or Create an account to join the conversation.
- RonS
-
- Offline
- Moderator
-
Less
More
- Posts: 598
- Thank you received: 58
5 years 3 months ago #122029
by RonS
RonS replied the topic: zonte metals
I pasted in the graphic of Dunns target from my update today. I took a guess where 1st drill hole might be, perhaps something on a 45 degree dip across the anomaly??
Please Log in or Create an account to join the conversation.
- Gambler
-
- Offline
- Platinum Member
-
Less
More
- Posts: 1001
- Thank you received: 26
5 years 3 months ago #122028
by Gambler
Gambler replied the topic: zonte metals
I would bet the stock moves and picks up volume when nobody expects it.
That said, the best time to buy is when things are quiet, but most of us here are probably happy with our position.
Just don't be the guy that says he wished he bought more when the stock is 70 cents or $1
That said, the best time to buy is when things are quiet, but most of us here are probably happy with our position.
Just don't be the guy that says he wished he bought more when the stock is 70 cents or $1
Please Log in or Create an account to join the conversation.
- flynn
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 975
- Thank you received: 9
5 years 3 months ago #122027
by flynn
flynn replied the topic: zonte metals
Are we Halted?
I know terrible joke.
I know terrible joke.
Please Log in or Create an account to join the conversation.
- agilebill
-
- Offline
- Junior Member
-
Less
More
- Posts: 28
- Thank you received: 2
5 years 3 months ago #122025
by agilebill
agilebill replied the topic: zonte metals
Flynn, I am fine with your perspective. I have seen that behavior before with other companies that are purely promoters. I do not feel Zonte is in that category. I believe they are legitimate mining company. We will see
Please Log in or Create an account to join the conversation.
- flynn
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 975
- Thank you received: 9
5 years 3 months ago #122023
by flynn
flynn replied the topic: zonte metals
"However I believe the stock will be valued around $2/share for a Columbia announcement."
its been 2 years since an update. I'm at the point now that Columbia is a bit of a mystery. it was all a dream.
its been 2 years since an update. I'm at the point now that Columbia is a bit of a mystery. it was all a dream.
Please Log in or Create an account to join the conversation.
- tonyk
-
- Offline
- Junior Member
-
Less
More
- Posts: 35
- Karma: 1
- Thank you received: 1
5 years 3 months ago #122022
by tonyk
tonyk replied the topic: zonte metals
What is the news on GLI? Can’t find anything anywhere.
Thx
Thx
Please Log in or Create an account to join the conversation.
Moderators: RonS
Time to create page: 0.258 seconds