Zonte Metals TSXV:ZON, OTC:EREPF

The last 4 technical press releases keep advancing the Cross Hills Copper Project .

This 25 km property has many drill ready targets , and these targets are rather significant in size .

Junior Companies get excited about 100-200 million ton targets and the targets in Zonte’s last three press releases were all greater than 1 billion tons targets .

Zonte has and is going after big targets  !

Currently , Zonte is doing the gravity survey over the Nine Mile target  . The Nine Mile target  is about 4 km by 3 km , clearly the largest target at Cross Hills . The magnetic anomaly is the largest within the project .

The recent press indicated that a possible gravity survey could be completed at the Southern portion of the Big K anomaly .

Big Copper Companies are looking for advanced copper plays and Zonte’s 140 square km Cross Hills Project should be on the radar screen based on the last few press releases . Zonte Metals  Pay Day will come and Zonte shareholders should will be rewarded with a much higher share price .

Remember , there are only about 81 million shares currently outstanding and the market cap is under a $6 million  .

Christopher has done an excellent job to keep the shares outstanding so low , with so many exploration techniques completed   to advance the Cross Hills Project .

Ron , almost everyone is still holding all their Zonte shares . Many shareholders know that the Junior Mining Stock Market  is at a very low level .  Zonte’s Trading volume during the last 3 months averaged less than 1 million shares monthly .

Plus . I am certain that a lot of the trading volume was related to tax loss selling !

Canadian Copper Companies with future strong results , should pleasantly reward their patient shareholders .

Hopefully , later in 2025  Zonte has the ingredients that major Copper Companies  will want to be involved with Zonte Metals .

Go Zonte Go !!!

We all know that the Canadian junior stock market is in the dumps and has been for awhile .

The Canadian dollar and Canadian economy are bad at best .

However , Canadian junior mining companies are cyclical and should have their time in the spotlight again .

Companies must successfully find new assets of economical size in safe jurisdictions .

It also helps when the number of shares outstanding is low and Zonte has only about 80 million shares outstanding .

Plus the market capitalization is significantly below where it should be based on the recent corporate press releases .

There is a lot of copper at Cross Hills . Therefore , good stock price upside exists !

With that said , Zonte shareholders are patiently waiting for Terry Christopher to continue finding more copper .

The website clearly shows the 140 square kilometre project is rather large and fertile with copper .

Cross Hills is the type of project that majors are searching for to replace and add to their existing copper reserves .

This is a new Copper Discovery ! A large mineralized system exists !

Slowly and carefully review the Copper Presentation on the website  .

Appreciate how big some of the targets are and we are fortunate that many advanced targets already exist .

With continued success , it appears that Zonte Metals has an opportunity to find a new copper belt in Canada !

There is much room for substantial Zonte share price appreciation .

In my opinion , 2025 and beyond will have excellent times as future press releases will be rewarded with traction in the stock market !

Go Zonte Go !!!

The Nov. 26th Press Release was very encouraging . The gravity anomaly at K9 and having association with other data to support the target concept including magnetics , copper mineralization in rocks , copper in soils , geochemical and geological datasets , as well as faults .

GRAVITY ANOMALIES OFTEN HOST COPPER MINERALIZATION IN IOCG  SYSTEMS .

This very large gravity anomaly has significant tonnage potential when you multiply the length times width and times the nice depth , times the rock density . Also the gravity anomaly sits about 75 to 100 meters below the surface .

This K9 target represents a exciting large scale drill target appears to be the next area for Zonte Metals to drill .

Looking forward to the K9 drilling results .

Go Zonte Go !!!

October 11, 2024 – TheNewswire – TSXV: ZON Zonte Metals is pleased to provide an update on the K6 drilling program at its Cross Hills Copper Project in Newfoundland and Labrador.

Terry Christopher, President and CEO comments; “Drilling at the K6 target continues to intersect copper mineralization, extending it along strike and depth. The mineralization remains open in several directions. Notably, mineralization at depth is broadening, with copper intersected in the previously discovered unit and the underlying adjacent unit. Along one N-S section, drilling has successfully traced mineralization over 170 meters, where it remains open at depth. The Company is planning a series of drill holes, which will include aggressive step-outs along strike and depth, as it continues to target potential higher-grade mineralization at the K6 target. The continued success at K6 highlights the value of the Company’s integrated dataset, developed over the past six years. Based on these results, additional exploration programs are being implemented across multiple targets, most of which will be drill-ready upon completion, pending results. An update on these activities will be provided shortly.”

A total of five drill holes, totalling 1,491 meters, were completed in the summer 2024 drill program and are hereafter designated by the CH24-0X number series. The program was designed to test extensions along strike and at depth from the previous drilling conducted in late 2023 (see results from February 28, 2023), as well as to explore several untested data signatures. Table 1 below contains the assay highlights from this phase with Figure 1 showing the drill hole plan map.

Mineralization remains open along strike to the northeast and at depth. To the northeast, drill hole CH23-01, drilled in late 2023, may have been collared too far south of the potential copper extension identified in CH24-01, possibly missing the target zone. It is currently unclear whether mineralization extends to the west, however, noted drill core alteration in holes CH24-04 and CH24-05 suggest further testing is needed, either stepping out to the north or at greater depth.

Table 1. Drill hole assay data from the K6 drilling.

too bad the Yukon isn’t drilled, the possibility of hitting good grades up there are very high, still no news of the trial date, in mid-november it will be 3 years already that it was announced Zonte would receive a court date, still waiting,

It’s mind bundling that nobody’s buying at $0.065, can’t believe it !!!

Thanks Hoss, guess they’re also waiting for drill results as we are before making a deal, RonS said majors have an eye on Zonte, could more that one copper producer make a deal, for now the share price is at $0.06, what role the share price has for making a deal.

This stock is probably held by individuals only. I suspect the seller last week is an individual or a couple of them getting frustrated with their investment.  So they sell, simple as that.

How do you know if this stock is cheap. If the stock price sits at 7-8 cents without any buyers it seems like a no brainer, no reason to buy. The price is at 7 cents because the company is not proving its worth any more than 7 cents.  I know its an exploration company and this is how they work.

Where are all the interest that Zonte states they have. They are not buying so this proves there is no interest. Where are all the investors/speculators? Sure Terry bought at 4 cents a while back but he bought very little and it proves nothing.

Don’t believe the words believe what is in front of us.

You will be wrong Pasta2…lol…

The July 2024 , Cross Hills – K6 Drilling Results will be announced shortly , when received and compiled .

In general , companies should be rewarded for good results , especially positive Copper Data which us shareholders

are hoping for .

Let Zonte continue to find more copper .

With over 125 square kilometres of  copper mineralized land  and 12 generally advanced targets , some of which are

rather large in size ,  September should be a good month .

Yes , shareholders should be buying ahead of the drill results .

I am looking forward to the next press release .

Go Zonte Go !!!

Guess will have drill results mid October, results are in the lab !!!

https://www.instagram.com/zontemetals/p/C9LRWo5vdSf/?hl=en

ZONTE METALS ANNOUNCES IT HAS EXTENDED THE BIG K TARGET AND UPDATES DRILLING ON ITS CROSS HILLS COPPER PROJECT.

Zonte Metals Inc. has provided an update on its continuing exploration program at the Cross Hills iron oxide copper gold project.

Additional soil sampling conducted adjacent to and south of the previously discovered Big K target has extended the copper-in-soil anomaly to over three kilometres (km). The Big K target was previously identified from coincident magnetic and gravity anomalies, with bedrock copper mineralization and a copper-in-soil anomaly, sitting is a structural corridor. The additional soil sampling to the south of the Big K target has identified an extension of the original copper-in-soil anomaly, now measuring 3,300 metres (m) in length and up to 650 m in width. This extended length also coincides with a magnetic anomaly, which is defined as a string of magnetic highs through the target.

Further exploration, including a gravity survey, prospecting and mapping, will be required for this new extension .

Previously, the company identified copper mineralization in several locations on the northern half of the Big K target. In one grab sample, chalcocite veining in a granite capping unit returned 2.82 per cent copper (Cu), 10.0 grams per tonne (g/t) silver (Ag) and 0.17 per cent triuranium octoxide (U3O8). The nature of the mineralization may suggest fluid remobilization from depth and into the overlying granite.

The company is also pleased to announce the completion of the recently announced drill program at the K6 target. Five drill holes tested additional extensions of the previously drill discovered copper mineralization. Drill hole logging is near completion after which the samples will be delivered to the lab.

RonS, can we change the avatar, tried and ain’t working.